Forrex Vehicle System

Most vehicle fires start in the engine compartment. The fires are often difficult to detect and even more difficult to extinguish with a regular fire extinguisher.

A tested and certified fire suppression system in combination with an efficient detection is the best protection during an emergency.

Forrex extinguishing system detects rapid increases in temperature and extinguish fires quickly and efficiently while protecting against re-ignition.

The system is designed to be used worldwide in both cold and warm climates. It is modeled on the international guidelines SPCR 183 and the Swedish guidelines SBF 127.

The system is designed to perform optimally even under difficult conditions and in harsh environments. The system operates at low pressure, which saves space and works down to -50 o C.

Forrex Container

Description

Dafo’s new patented Release Module represents a totally new concept in extinguishing agent containment and completely revolutionizes the way vehicle fire suppression systems are designed. Thanks to it’s unique construction the module becomes totally independent of orientation while maintaining a 100 % discharge of the agent. This feature enables optimal fitting even when available space is a deficiency.

The casing in anodized aluminium offers a very esthetical installation without compromising on ruggedness or resistance to environmental exposure. The modules are available in standard sizes from 5 to 25 liters of Forrex agent. The design also enables customized modules with respect to length and volume.

Design

The Release Module is manufactured from a sturdy, red-anodized, aluminium profile and is fitted with a detachable top and bottom. Inside the profile runs a piston that forces the agent out when the system is activated with a nitrogen cartridge.

A built in valve evacuates remaining propellant once the Release Module is emptied of agent, ensuring that the system returns to an un-pressurized state. The design allows for a much higher flow rate than previously possible with conventional solutions. It also makes the design of the distribution system easier and more flexible.

Our vast knowledge of vehicle suppression systems as well as the input from experienced service technicians has been taken into the development of this product. The normally un-pressurized Release Module is optimized for easy maintenance and recharge in the field.

Operation

The Release Module is normally un-pressurized. A nitrogen cartridge is connected to the propellant inlet. Upon actuation the Release Module is pressurized and the internal piston forces the agent out through the distribution system.

The system is released by an actuator that is mounted on the nitrogen cartridge. The actuators are available in three different versions; mechanical, pneumatic/electric or mechanical/pneumatic/electric.

The agent is distributed with a constant low pressure through a pipe system or a hose emanating in the proper amount of nozzles. The low working pressure ensures personal safety during operation even if the system is damaged. Because the pressure is kept constant during the discharge, optimal nozzle performance is guaranteed.

For bigger applications, several Release Modules can be connected together. The nitrogen cartridge on the first module is activated electrically or mechanically and the cartridges for the subsequent modules are activated pneumatically utilizing the pressure from the first cartridge. The Release Module can be orientated in any position as it’s function is totally independent of orientation.

Forrex AB30

Description

Dafo AB – 30 is a ready to use (premixed) liquid agent for fires of class A and B. Unlike regular AFFF premixes, Dafo AB – 30 has excellent storage stability of up to 10 years under correct storage conditions. The product has superior fire performance on class A fires and compared with regular AFFF premix solutions Dafo AB – 30 is freeze protected to – 30 OC and can be used in extinguishers or systems that will be stored/installed in cold areas.

Application

Dafo AB – 30 is intended for use on class A and B fires. It can be used with both aspirating and non aspirating discharge devices. It is compatible with all dry chemical powders. Dafo AB – 30 can be used in:

Fire extinguishers
Extinguishing systems

Typical Performance

Dafo AB – 30 has been designed to combine the best properties off:

Aqueous film forming foam (AFFF)
Class A fire extuinguishing agent
Cooling effect of Sprinkler systems

The fire performance of Dafo AB – 30 has been tested and documented according to EN 1568 part 3, and achieves 13 A / 144 B according to EN 3 when used in an appropriate fire extinguisher.

Special Qualities

Extinguishes fire through a combination of oxygen depletion and cooling.
The extinguishing agent creates a protective layer that efficiently clings to all surfaces and prevents re-ignition.
It is very important to cool down overheated parts! Gas, dry chemical or water mist all have a cooling effect but, apart from dry chemical which heavily contaminates the protected area, they all suffer from their light density which makes them easily dispersal. Forrex does not depend on the amount of agent alone to achieve efficient cooling, but also relies on the precision performance of the nozzles, the velocity of the spray and the density of the agent that, when combined, leads to its unsurpassed performance.
Forrex is environmentally friendly.
After release the engine space just needs to be rinsed with water.
Forrex is non-aggressive and does not affect material and components in a harmful way.

Storage

Stored in original unbroken packaging or correctly filled in appropriate fire extinguisher or storage tanks the product will have a long shelf life. The recommended storage temperature range of Dafo AB – 30 is from -30°C to 60°C (up to 90°C for shorter periods). Shelf life of up to 10 years will be found in controlled climates. The agent should only be stored in stainless steel,anodized aluminium or plastic containers. Since electromagnetic corrosion can occur at joints between different metals when they are in contact with foam concentrate, only one type of metal should be used for pipelines, fittings and tanks employed in the storage of foam solution.

Forrex AB50

Description

Forrex agent AB – 50 is a ready to use (premixed) liquid agent for fires of class A and B. Unlike regular AFFF premixes, Forrex agent AB – 50 has excellent storage stability of up to 10 years under correct storage conditions. The product has superior fire performance on class A fires and compared with regular AFFF premix solutions Forrex agent AB – 50 is freeze protected to –50 OC and can be used in extinguishers or systems that will be stored/installed in cold areas.

Application

Forrex agent AB – 50 is intended for use on class A and B fires. It can be used with both aspirating and non-aspirating discharge devices. It is compatible with all dry chemical powders.

Fire extinguishers
Extinguishing systems

Typical Performance

Forrex agent AB – 50 has been designed to combine the best properties off:

Aqueous film forming foam (AFFF)
Class A fire extinguishing agent
Cooling effect of Sprinkler systems

The fire performance of Forrex agent AB – 50 has been tested and documented according to EN 1568 part 3, and achieves 13 A / 113 B according to EN3-7:2004+A1 2007 when used in an appropriate fire extinguisher.

Special Qualities

Extinguishes fire through a combination of oxygen depletion and cooling.
The extinguishing agent creates a protective layer that efficiently clings to all surfaces and prevents re-ignition.
It is very important to cool down overheated parts! Gas, dry chemical or water mist all have a cooling effect but, apart from dry chemical which heavily contaminates the protected area, they all suffer from their light density which makes them easily dispersal. Forrex does not depend on the amount of agent alone to achieve efficient cooling, but also relies on the precision performance of the nozzles, the velocity of the spray and the density of the agent that, when combined, leads to its unsurpassed performance.
Forrex is environmentally friendly.
After release the engine space just needs to be rinsed with water.
Forrex is non-aggressive and does not affect material and components in a harmful way.

Storage

Stored in original unbroken packaging or correctly filled in appropriate fire extinguisher or storage tanks the product will have a long shelf life. The recommended storage temperature range of Forrex agent AB – 50 is from -50°C to 50°C (up to 90°C for shorter periods). Shelf life of up to 10 years will be found in controlled climates. The agent should only be stored in stainless steel,anodized aluminium or plastic containers. Since electromagnetic corrosion can occur at joints between different metals when they are in contact with foam concentrate, only one type of metal should be used for pipelines, fittings and tanks employed in the storage of foam solution.

Description

Design

Operation

Description

Application

Typical Performance

Special Qualities

Storage

Description

Application

Typical Performance

Special Qualities

Storage

Installations

How It Works